AEM

AEM’s CD Power Cable (PN 30-2218) simplifies power and ground connections for the CD Digital Dash Displays for non-AEMnet equipped, 3rd Party device harnesses (CD-5 Carbon and CD-7 Dashes are powered through an AEMnet connection on equipped devices, and do not require a Power Cable). The CD-7 Power Cable connects to the AEMnet connector on the CD-7 wiring harness and includes a pigtail connection with power and ground leads, allowing for CAN connection to 3rd Party devices through the CAN 2 connector on the CD-7 main harness.

Learn More

AEM’s OBDII CAN Plug & Play Adapter Harness make CD Dashes the perfect racing displays for track day enthusiasts who want to be able to see engine and vehicle data but are still running a factory ECU. This is especially true when a CD-5 Carbon or CD-7 Digital Dash and OBDII CAN PNP Adapter Harness are combined with the Vehicle Dynamics Module to add GPS, 3-axis accelerometer and 3-axis gyroscope for track mapping and lap times, and critical vehicle dynamics data including G-loads, roll, pitch and yaw. And for CD Dash owners with CAN OBD-II who are already using the dash and receiving channels from a data logger or other CAN-enabled device, you can now add additional channels through the OBD connection with no additional wiring!

Learn More

Restore the performance of your high-mileage fuel pressure regulator with these AEM Electronics fuel pressure regulator rebuild kits. You'll regain the accuracy and performance that your regulator had when it was new.

Learn More

AEM Performance Electronics has expanded its line of pressure sensors to include a line of high quality brass pressure sensors at an affordable price. Each sensor kit includes a brass pressure sensor and standard 3-pin weatherproof flying lead connector. All sensor connections are 1/8-inch NPT.

Learn More

AEM's Bosch 4.2LSU Wideband UEGO O2 replacement sensor kit includes only the sensor (with attached cable and male connector) and is intended to replace an existing mounted wideband sensor used with AEM wideband air/fuel UEGO controllers.

Learn More

These AEM Electronics high-flow in-tank electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a prefilter, hose, clamps, and flying lead.

Learn More

The AEM Boost Control Solenoid is specially modified for use as a boost control solenoid in high boost automotive systems. The kit includes all the necessary fittings to plumb your wastegate for either an internal or external wastegate. They are pressure-tested to an amazing 100 psi and will not leak.

Learn More

AEM Electronics Tru-Time adjustable cam gears allow you to get maximum performance out of your engine by advancing or retarding cam timing in precise, one-degree increments. That's especially useful for heavily modified engines. AEM Electronics Tru-Time adjustable cam gears are CNC-machined from 6061 T-6 billet aluminum and have precision-cut, hard-anodized gear teeth. There are also laser-etched markings on the leading edge of the gears in one-degree increments for easy adjustment. Grade 8 bolts, installation instructions, recommended cam-gear settings, and decals are included.

Learn More

AEM Electronics Tru-Time adjustable cam gears allow you to get maximum performance out of your engine by advancing or retarding cam timing in precise, one-degree increments. That's especially useful for heavily modified engines. AEM Electronics Tru-Time adjustable cam gears are CNC-machined from 6061 T-6 billet aluminum and have precision-cut, hard-anodized gear teeth. There are also laser-etched markings on the leading edge of the gears in one-degree increments for easy adjustment. Grade 8 bolts, installation instructions, recommended cam-gear settings, and decals are included.

Learn More

AEM Electronics high-volume fuel rails feature a 1/2 in. fuel bore capable of flowing enough fuel to support most high-horsepower applications. This large bore also dampens back pulses created by larger injectors and works perfectly with stock injector sizes. An additional port is included to accommodate a nitrous setup or fuel pressure gauge. Instructions, hardware, fittings, and injector O-rings are also included.

Learn More

AEM Tru-Time Adjustable Cam Gears increase horsepower and torque without having to change the camshaft and are must-have items for engines that are milled, forced induction, high compression and/or utilizing aftermarket competition cams. Fits D16Y7 and D16Y8 Engines.

Learn More

AEM Electronics high-volume fuel rails feature a 1/2 in. fuel bore capable of flowing enough fuel to support most high-horsepower applications. This large bore also dampens back pulses created by larger injectors and works perfectly with stock injector sizes. An additional port is included to accommodate a nitrous setup or fuel pressure gauge. Instructions, hardware, fittings, and injector O-rings are also included.

Learn More