TALK TO AN EXPERT
CALL TOLL FREE: 1-888-744-0174
TORONTO: 647-344-6816
CHAT NOW

 

You have no items in your shopping cart.

K-Tuned

K-Tuned

  1. K-Tuned Rubber Keychain

    $6.99

    K-Tuned keychain is a must have for all you 9k revving, k-series loving beasts. We all know nothing impresses a lady more than a gutted hatch that doesn't have AC, power steering, or cup holders. Plus, Chuck Norris has this keychain... Like you needed another reason.

    Learn More

  2. K-Tuned Hose separator

    $7.49

    Separate two hoses running side-by side with these handcuff style hose separators. Available in 4AN-12AN, in black anodized finish.

    Learn More

  3. K-Tuned Fan Switch Plug

    $9.99

    If aren't using the OEM fan switch on your K-Tuned Swivel Neck T-stat, you will need this plug to block off the open port.

    Learn More

  4. K-Tuned Heater Hose Delete Cap

    $9.99

    The K-Tuned heater hose delete cap is used to block off any unused 5/8" diameter coolant ports. They come in handy when deleting heater hoses and other coolant related accessories. Engine setups using our K-Tuned Water Plate system will find these bypass caps very useful.

    Learn More

  5. K-Tuned Brake/Clutch Reservoir Cover

    $13.99

    K-Tuned reservoir socks are made from Terry Cotton and feature the signature K-Tuned logo embroidered on the front. Reservoir socks are designed to cover your clutch and brake reservoirs and absorb and trap brake fluid from damaging your engine bay. Brake fluid is very corrosive and can eat away at the paint and components quickly. Sold Individually.

    Learn More

  6. K-Tuned Heater Outlet Plug

    $14.99

    Some of you may be interested in deleting the heater hoses and heater core from your K-swapped vehicle. The K-Tuned Heater outlet plug is made from zinc plated steel and allows removal of the OEM heater hose fitting found on the exhaust side on some K-series cylinder heads. For installation, simply remove the OEM pipe fitting and replace it with our K-Tuned plug for a nice clean look. The plug comes with a new crush washer to prevent any coolant leaks. Ugly looped heater hoses are no longer needed. *Note, the tread on the head is M20x1.0

    Learn More

  7. K-Tuned MAP Port Plug

    $14.99

    K-Tuned MAP port plug is a simple and clean design to eliminate extra unused MAP ports found on K-series intake manifolds. When making changes to your intake manifold or throttle body you will often have more than one MAP port. K-Tuned's billet plug is made of 6061 aluminum and uses an o-ring to ensure proper seal. This is a must have for boosted vehicles as the extra pressure inside the manifold will often push out plugs that our not secured.

    Learn More

  8. K-Tuned Coolant Temp Sensor Adaptor Fitting

    $14.99

    Unlike other fittings on the market, the K-Tuned coolant temp sensor adapter fitting is designed to fit perfectly on your K-Series engine. This fitting will replace the oem Idle Air Assist Valve and give you the perfect location to mount the coolant gauge temp sensor on any K-swap. The coolant temp sensor must be added to allow the cluster on a K-swap vehicle to accurately read the coolant temp. Finished in anodized silver.

    Learn More

  9. K-Tuned Fuel Pressure Regulator Fittings Kit

    $18.74

    This kit includes an 8AN plug, 8AN full flow port to 6AN adapter (fuel inlet) and a 6AN full flow port to 4AN fitting ( fuel return). We put this kit together because it is the most popular setup for fuel feed and return sizes. This kit is designed to match up with the fittings used on the K-Tuned fuel rail.

    Learn More

  10. K-Tuned Center Port Fitting for Fuel Rail

    $18.74

    Here is another optional fitting that can be used with our K-Tuned Fuel Rail. Available in 6AN or 8AN, the center port fitting can be used as either a feed or return depending on the fuel demands of the engine being used. Show and all motor cars with up to 300 whp will like the clean look this fitting gives because the fuel feed line can be hidden or 'tucked' for super clean looking engine bay. Turbo setups have used this third port for a return line to the FPR when both ends of the rail are used in a duel feed system. Anodized black finish with 2 O-rings included.

    Learn More