SPC

This special 10 point socket is needed when removing the rear clearance arm on new 2001 and up Honda Civics and Acura RSX's.

Learn More

The new EZ Cam( XR is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degrees (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle. Fits 2002-2002 Acura RSX, 2002-2002 Honda Civic SiR, and 2006-2011 Honda Civic.

Learn More

The new EZ Cam XR is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degrees (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle. Fits 2002-2006 Acura RSX, and 2003-2005 Honda Civic SiR.

Learn More

For popular Honda Civics and Acura Integras. These arms are for vehicles that retain the stock ride height or have been lowered for performance. Simply replace the OE arm with the EZ Arm XR, and you can adjust the rear camber from -2.0 Degrees to +5.0 Degrees. Fits 1996-2000 Acura 1.6 EL, 1994-2001 Acura Integra, 1988-2000 Honda Civic, 1993-1997 Honda Del Sol, and 1988-1991 Honda CRX.

Learn More

Adjust rear toe on Honda Accord and Acura TL models with this fully adjustable control arm from SPC. This remove and replace arm provides +/-3.0 degrees of adjustment and allows the installer to easily dial in alignment changes to reduce tire wear, enhance handling or directly replace worn chassis component with an easy to adjust arm. Fits 2004-2008 Acura TSX, 1999-2008 Acura TL and 1998-2007 Honda Accord.

Learn More

The Honda Accord and Acura TSX and TL Rear Adjustable Toe Arm is an ideal replacement for a damaged OE toe arm. Additionally, it provides added toe change beyond what the OE Toe Cam offers. This arm will be necessary to correct toe changes that the 67545 adjustable camber arm will create when adjusting beyond ±1 Degrees. Fits 2009-2014 Acura TL, 2009-2014 Acura TSX, 2008-2016 Honda Accord, and 2010-2015 Honda Accord Crosstour.

Learn More

This EZ Arm corrects rear camber on Honda's redesigned 2001-2005 Civic along with the 2002-2006 Acura RSX. Simply replace the OE arm with this arm, perfect for stock height and lowered vehicles.

Learn More

These adjustable upper ball joints make front camber adjustments for many vehicles with upper control arms. By replacing the factory ball joint, this sliding ball joint allows for greater changes than previously available. With an OE quality replacement ball joint, this sliding plate assembly is perfect for vehicles that have been lowered for performance, or retain the factory ride height. For changes greater than +1.5 Degrees check out our Extended Range Ball Joints. Fits 1990-1997 Honda Accord.

Learn More

These adjustable upper ball joints make front camber adjustments for 1997-2001 Honda Prelude SH Model. By replacing the factory ball joint, this sliding ball joint allows for greater changes than previously available. With an OE quality replacement ball joint, this sliding plate assembly is perfect for vehicles that have been lowered for performance, or retain the factory ride height. For changes greater than +1.5 Degrees check out our Extended Range Ball Joints.

Learn More

These adjustable upper ball joints make front camber adjustments for many vehicles with upper control arms. By replacing the factory ball joint, this sliding ball joint allows for greater changes than previously available. With an OE quality replacement ball joint, this sliding plate assembly is perfect for vehicles that have been lowered for performance, or retain the factory ride height. For changes greater than +1.5 Degrees check out our Extended Range Ball Joints. Fits 1992-2001 Honda Prelude Rear, and 1992-1996 Honda Prelude Front and Rear.

Learn More

SPC front and rear camber kit for 2002-2006 Acura RSX

Learn More

Designed specifically for the S2000, thess ball joints corrects camber on both the front and rear. An OE quality ball joint, this adjustable part corrects camber up to ±1.5 Degrees.

Learn More