CALL TOLL FREE: 1-888-744-0174
TORONTO: 647-344-6816


You have no items in your shopping cart.

SpeedFactory Racing 3" Stainless Steel Mandrel Bent Exhaust Piping Kit

Be the first to review this product

Reward Points You will earn 10 Points for writing a review this product.

Availability: In stock

PART #: SPF-SF-04-200
The SpeedFactory Racing 3" Stainless Steel Mandrel Bent Exhaust Piping Kit is a simple and affordable high-performance exhaust piping kit that fits all the most common FWD Honda/Acura applications, done just the way we like.

Due to the many differences in each customer's car and setup, some welding and fabrication is always needed to get a performance exhaust system to fit just right on that specific car. This kit allows you the freedom of designing a custom exhaust system using high-quality mandrel bent tubing with the most difficult parts (the bends and routing) already done for you, making the task of making a custom exhaust system very easy. Our T304 Stainless Steel tubing has extra deep 5” long slip joints that allow the installer a large range of adjustment. Use any center/center inlet and outlet muffler(s) or resonator(s) you choose and design your own custom exhaust system that follows the OEM path and suits your build's needs.

Our kit uses no aggravating or leaky flanges or clamps either - Simply weld the slip joints and hangers in position and enjoy precise placement of your exhaust system without the unwanted shifting, movement, and exhaust leaks that commonly end up occurring when using flanges and/or clamps. Included are (5) stainless steel 3/8” diameter hangers that are fitted with an oversized 1/2” stainless sleeve to provide a tight fit inside your OEM rubber exhaust hanger insulators, keeping things firmly in position better than the loose-fitting original design.

**Note: Aftermarket rear sway bars and rear subframe braces may affect fitment in some cases.**


’92-00 Civic (ALL)
1992, 1993, 1994, 1995 - 1.5L/1.6L - CX, VX, LX, DX, EX, Si, - 2/3/4 Door, Coupe/Sedan/Hatchback
1996, 1997, 1998, 1999, 2000 - 1.6L - CX, DX, LX, HX, EX, Si, - 2/3/4 Door, Coupe/Sedan/Hatchback

’94-’01 Acura Integra (ALL)
1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 - 1.8L - RS, LS, SE, GS, GSR, TypeR - 3/4 Door, Sedan/Hatchback
Manufacturer SpeedFactory

Product Fits:

1992-2000 Honda Civic
1996-2000 Acura EL
1994-2001 Acura Integra


Write Your Own Review

You're reviewing: SpeedFactory Racing 3" Stainless Steel Mandrel Bent Exhaust Piping Kit

How do you rate this product? *

  1 2 3 4 5