TALK TO AN EXPERT
CALL TOLL FREE: 1-888-744-0174
TORONTO: 647-344-6816
CHAT NOW

 

You have no items in your shopping cart.

SpeedFactory

SpeedFactory

  1. SpeedFactory Heavy Duty Detent Spring Kit B-Series

    $27.99

    The SpeedFactory HD Detent Spring Kit is a set of upgraded coil springs that increases the positive ratcheting feel of your transmission, with an over 80% increase in spring rate over the soft factory springs. We have been using these springs in our own transmission builds for years, and now you can too ! Add enjoyment to your driving experience with this simple to install and inexpensive upgrade that gives improved feel and shift action as you engage each gear. Fits B-Series Transmissions.

    Learn More

  2. SpeedFactory Racing Upgraded D-Series Shifter Spring Kit

    $30.99

    The SpeedFactory Racing Upgraded D-Series Shifter spring is over 600% stronger than the OEM spring (the OEM spring is terribly soft and we found the need for a massively higher spring rate in this application) and gives your shifter a firm, positive feel and returns the shifter to the center position with authority.

    Learn More

  3. SpeedFactory Billet Aluminum Camshaft Seal B/F/H-Series

    $34.99

    SpeedFactory Racing Billet Aluminum Camshaft Seals are precision CNC machined from 6061-T6 billet aluminum to our exacting tolerances for a tight precision fit and utilize a triple O-ring seal to ensure leak-free service. Our stylish black anodized finish adds durability and the laser-etched SF logo will match your other SpeedFactory components. Fits B/F/H-Series Engines.

    Learn More

  4. SpeedFactory Billet B-Series Breather Port Plug

    $34.99

    The SpeedFactory Billet B-Series Breather Port Plug was designed specifically for use on Honda/Acura B-Series engines to block off the OEM "black box" breather port.

    Learn More

  5. SpeedFactory Billet B-Series Crankcase Pressure Port Fitting

    $34.99

    The SpeedFactory Billet B-Series Crankcase Pressure Port Fitting was designed specifically for use on Honda/Acura B-Series engines to plug the OEM "black box" breather port and provide a location that is directly in the crankcase to install a 1/8” NPT pressure sensor, giving accurate pressure readings during engine operation.

    Learn More

  6. SpeedFactory Heavy Duty Detent Spring Kit K-Series

    $35.99

    The SpeedFactory HD Detent Spring Kit is a set of upgraded coil springs that increases the positive ratcheting feel of your transmission, with an over 80% increase in spring rate over the soft factory springs. We have been using these springs in our own transmission builds for years, and now you can too ! Add enjoyment to your driving experience with this simple to install and inexpensive upgrade that gives improved feel and shift action as you engage each gear. Fits K-Series Transmissions.

    Learn More

  7. SpeedFactory Racing OBD1 (Vehicle) to OBD2 (Distributor) Conversion Harness

    $41.99

    SpeedFactory Racing Distributor Conversion Harnesses were developed to save you time and also to help eliminate the many common problems associated with distributor re-wiring.

    Learn More

  8. SpeedFactory Racing OBD2 (Vehicle) to OBD1 (Distributor) Conversion Harness

    $41.99

    SpeedFactory Racing Distributor Conversion Harnesses were developed to save you time and also to help eliminate the many common problems associated with distributor re-wiring.

    Learn More

  9. SpeedFactory Racing 1.3 Bar High Performance Radiator Cap (Type A)

    $41.99

    Our high performance radiator cap will not only improve the appearance of your vehicle’s engine bay, but it will also play a vital role in improving the efficiency of your engine's cooling system.

    Learn More

  10. SpeedFactory Racing 1.3 Bar High Performance Radiator Cap (Type B)

    $41.99

    The SpeedFactory Racing 1.3 Bar High Performance Radiator Cap allows your vehicle’s cooling system to absorb and dissipate more heat by increasing the cooling system pressure, which allows your water temperature to raise roughly 10*F higher before reaching its boiling point. This is especially important in hot climates and under racing conditions.

    Learn More

  11. SpeedFactory Titanium VTEC Eliminator Pin Kit for Honda D Series

    $55.99

    These pin kits are designed to be used in drag race applications where the engine is operated at high RPM with limited idle/low rpm use, not in a street car. Fits D15/D16 VTEC Engines.

    Learn More

  12. SpeedFactory Racing K-Series Drag Spec Shifter Spring Kit

    $57.99

    The SpeedFactory Racing K-Series Drag Spec Shifter Spring Kit is the strongest available (over 200% stronger than OEM springs) and gives your shifter a firm, positive feel and returns the shifter to the center position with authority which improves shift accuracy and speed while rowing through the gears.

    Learn More

  13. SpeedFactory Billet B-Series VTEC Solenoid Block Off Plate

    $68.99

    The SpeedFactory Billet B-Series VTEC Solenoid Block Off Plate is for use in applications where VTEC is inactive, such as standard 3-lobe cams locked onto the VTEC lobe with our SFR Titanium VTEC Eliminator Pin Kit or when using a single or dual lobe setup like Web or Ferrea.

    Learn More

  14. SpeedFactory Racing Titanium Fender Hardware Kits

    $68.99

    All SpeedFactory Racing Titanium Fender Hardware components are machined from Ti-6Al-4V Titanium and the scratch-resistant washers feature a laser-etched SpeedFactory Racing logo.

    Learn More

  15. SpeedFactory Racing K-Series Coil Pack Cover

    $100.99

    Speedfactory Racing K-Series Coil Pack Cover fits most K20 and K24 engines.

    Learn More

  16. Speedfactory OBD0 MPFI - OBD1 Jumper Harness

    $103.99

    The use of an OBD-1 (92-95) ECU is needed for proper tuning of your high performance engine. The SpeedFactory OBD-0 to OBD-1 ECU Conversion Harness for Multi-Point Injection allows you to use a JDM or US OBD-1 M/T ECU in an 88-91 Civic, CRX or a 90-91 Integra, (OBD-0) Chassis.

    Learn More

  17. SpeedFactory B18/B20 NON VTEC Titanium Valve Cover Hardware Set

    $103.99

    SpeedFactory Racing's Titanium Valve Cover Hardware Set adds a unique finishing touch to any engine bay. These kits are available for Honda / Acura B-Series Non-VTEC engines in Raw and Burnt finishes, and each titanium washer is precision laser-etched with our signature logo.

    Learn More

  18. SpeedFactory Racing -16an Thermostat Housing for D/B/H-Series

    $107.99

    The SpeedFactory Racing -16AN Thermostat Housing is designed to replace your factory thermostat housing and allows you to easily adapt -16AN hoses and fittings to your engine's cooling system. All SpeedFactory thermostat housings have provisions for the OEM cooling fan switch and engine harness ground wire.

    Learn More

  19. SpeedFactory K-Series VTEC Titanium Valve Cover Hardware Set

    $110.99

    SpeedFactory Racing’s Titanium Valve Cover Hardware Set adds a unique finishing touch to any engine bay. These kits are available for Honda / Acura K-Series engines in Raw and Burnt finishes, and each titanium washer is precision laser-etched with our signature logo.

    Learn More

  20. SpeedFactory Honda / Acura Titanium K Series Exhaust Manifold Stud Kits

    $110.99

    SpeedFactory Titanium Stud Kits are made of high quality Ti 6Al-4V and incorporate a hex key tip that allows them to be easily installed using an Allen wrench. Titanium 12-point nuts and washers are included.

    Learn More

  21. SpeedFactory B-Series VTEC Coil On Plug Adapter Plate

    $113.99

    Commonly known performance issues with OEM Honda/Acura distributor igniters at higher power levels cause many people to convert to more reliable COP (coil on plug) style ignition systems, and the SpeedFactory Racing B-Series VTEC Coil On Plug Adapter Plate is necessary for those making the switch. Our black anodized, CNC-machined billet aluminum plate will perfectly fit atop your B-Series VTEC valve cover to adapt OEM fitment K-Series ignition coils to your engine.

    Learn More

  22. SpeedFactory Titanium K Intake Manifold Stud Kits

    $114.99

    SpeedFactory Titanium Stud Kits are made of high quality Ti 6Al-4V and incorporate a hex key tip that allows them to be easily installed using an Allen wrench. Titanium 8mm 12-point nuts and washers are included.

    Learn More

  23. SpeedFactory Titanium VTEC Eliminator Pin Kit for Honda B Series

    $117.99

    These pin kits are designed to be used in drag race applications where the engine is operated at high RPM with limited idle/low rpm use, not in a street car. These have been used in both the Competition Clutch Outlaw Civic and Vibrant Performance SFWD Civic for years.

    Learn More

  24. SpeedFactory Titanium VTEC Eliminator Pin Kit for Honda K Series

    $117.99

    These pin kits are designed to be used in drag race applications where the engine is operated at high RPM with limited idle/low rpm use, not in a street car. Fits K20A2, K20Z1, K20Z3, K24A2 Engines.

    Learn More

  25. SpeedFactory Titanium VTEC Eliminator Pin Kit for Honda H Series

    $117.99

    These pin kits are designed to be used in drag race applications where the engine is operated at high RPM with limited idle/low rpm use, not in a street car. Fits H-Series Engines.

    Learn More

  26. SpeedFactory Titanium VTEC Eliminator Pin Kit for Honda F20C/F22C

    $117.99

    These pin kits are designed to be used in drag race applications where the engine is operated at high RPM with limited idle/low rpm use, not in a street car.

    Learn More

  27. SpeedFactory Billet Distributor Cap Delete D/B/H-Series

    $121.99

    Commonly known performance issues with OEM Honda/Acura distributor igniters cause many people to convert to more reliable COP (coil on plug) style ignition systems. The SpeedFactory Billet Distributor Cap Delete was developed for COP-converted Honda/Acura engine setups utilizing the factory internal distributor sensors.

    Learn More

  28. SpeedFactory 3-Port Boost Control Solenoid Kit

    $131.99

    The SpeedFactory Racing 3-Port Boost Control Solenoid Kit allows precise boost control with a PWM (pulsewidth modulation) signal from a source (Engine Control Module or Electronic Boost Controller). This solenoid can raise the boost level as high as 2-3 times the spring pressure of the wastegate. This kit can be used with single or multiple wastegates, and is compatible with almost every electronic boost controller and tuning software. This product can be used with internal or external wastegates.

    Learn More

  29. SpeedFactory OBD1 to OBD2A (Reverse) ECU Conversion Harness

    $137.99

    The SpeedFactory Racing OBD1 to OBD2A Honda/Acura ECU Conversion Harness allows you to use any OBD2A Honda/Acura M/T ECU in a 92-95 Civic, 92-95 Acura Integra, 92-95 Honda Accord (4 Cylinder), 92-95 Honda Prelude, and 92-95 Honda DelSol. This harness is perfect for utilizing JDM Spec ECUs that are often included with Japanese engine swaps.

    Learn More

  30. SpeedFactory Titanium F20C/F22C Exhaust Manifold Stud Kit

    $142.99

    The use of factory exhaust manifold bolts and studs, especially with an aftermarket header/turbo system, can result in stripped or broken bolts and inadequate clamping force, resulting in leaks. This stud kit looks great and will allow you to properly clamp the exhaust manifold to the cylinder head without experiencing sealing problems, stud/nut failure, or ugly and troublesome rust and corrosion. Titanium is ~45% lighter, stronger, and will not corrode like your stock steel bolts or studs.

    Learn More

  31. SpeedFactory Honda / Acura Titanium B/D/F/H/J Series Intake/Exhaust Manifold Stud Kits

    $142.99

    SpeedFactory Titanium Stud Kits are made of high quality Ti 6Al-4V and incorporate a hex key tip that allows them to be easily installed using an Allen wrench. Titanium 12-point nuts and washers are included.

    Learn More

  32. SpeedFactory Two Piece Rear Bumper Diffuser

    $150.99

    The SpeedFactory rear bumper diffusers are designed with style and aerodynamics in mind. These are made from 6061 aluminum with a black powder coated finish. We have them available in this 2-piece design or we also offer this product in a 1-piece version.

    Learn More

  33. SpeedFactory 4-Port Boost Control Solenoid Kit (External Wastegates Only)

    $155.99

    The SpeedFactory Racing 4-Port Boost Control Solenoid Kit allows precise boost control with a PWM (pulsewidth modulation) signal from a source (Engine Control Module or Electronic Boost Controller).

    Learn More

  34. SpeedFactory Racing 70mm Throttle Body w/ Thermal Gasket B/D/H/F

    $165.99

    Introducing SpeedFactory Racing’s precision cast 70mm Throttle Body for Honda B, D, F, and H series - bolt-on increased airflow, throttle response, and power gains on both naturally aspirated and forced induction applications while retaining smooth throttle operation, drivability, and the ability to fine tune your idle with the plate position & idle air adjustment screws.

    Learn More

  35. SpeedFactory B / H-Series VTEC Titanium Valve Cover Hardware Set

    $165.99

    SpeedFactory Racing's Titanium Valve Cover Hardware Set adds a unique finishing touch to any engine bay. These kits are available for Honda / Acura B and H-Series VTEC engines in Raw and Burnt finishes, and each titanium washer is precision laser-etched with our signature logo.

    Learn More

  36. SpeedFactory Naturally Aspirated Oil Catch Can B-Series

    $206.99

    The SpeedFactory Racing Naturally Aspirated Catch Can is designed to work with any B-Series naturally aspirated (non-supercharged, non-turbocharged) engine setup. This breather setup is engineered to provide the sufficient crankcase ventilation your high performance engine needs, and also condenses crankcase blow-by oil and moisture correctly. The factory PCV system is replaced and all oil vapors are vented to the atmosphere through the single filter.

    Learn More

  37. SpeedFactory Racing 16V Battery Box

    $206.99

    The SpeedFactory Racing 16V Battery Box is designed for RH side framerail mounting and for use with XS Power 16V AGM lead acid batteries - models XP1000, D1600, and S1600. There are very slight differences in the case sizing between these models but all of them will fit our battery box.

    Learn More

  38. SpeedFactory Universal Race Radiator -16 AN Hose and Fitting Kit For B / D / F / H / K / J-Series

    $206.99

    Complete your cooling system plumbing confidently with our high-quality radiator hose and fitting kits that offer trouble-free installation and the performance you expect from SpeedFactory Racing.

    Learn More

  39. SpeedFactory Racing Tucked Radiator -16 AN Hose and Fitting Kit For B / D / F / H-Series

    $206.99

    Complete your cooling system plumbing confidently with our high-quality radiator hose and fitting kits that offer trouble-free installation and the performance you expect from SpeedFactory Racing.

    Learn More

  40. SpeedFactory Racing Tucked Radiator -16 AN Hose and Fitting Kit For K / J-Series

    $206.99

    Complete your cooling system plumbing confidently with our high-quality radiator hose and fitting kits that offer trouble-free installation and the performance you expect from SpeedFactory Racing.

    Learn More

  41. SpeedFactory Racing B-Series Upper Coolant Fill Neck

    $213.99

    SpeedFactory Racing B-Series Upper Coolant Fill Necks are compatible with most aftermarket radiator setups, and change the high point of your cooling system for easy filling and system air bleeding. Our necks are manufactured in-house using high quality aluminum materials and feature laser-cut head flanges to ensure a perfect fit every time.

    Learn More

  42. SpeedFactory Racing D-Series Upper Coolant Fill Neck

    $213.99

    SpeedFactory Racing D-Series Upper Coolant Fill Necks are compatible with most aftermarket radiator setups, and change the high point of your cooling system for easy filling and system air bleeding. Our necks are manufactured in-house using high quality aluminum materials and feature laser-cut head flanges to ensure a perfect fit every time.

    Learn More

  43. SpeedFactory Racing H-Series Upper Coolant Fill Neck

    $213.99

    SpeedFactory Racing H-Series Upper Coolant Fill Necks are compatible with most aftermarket radiator setups, and change the high point of your cooling system for easy filling and system air bleeding. Our necks are manufactured in-house using high quality aluminum materials and feature laser-cut head flanges to ensure a perfect fit every time.

    Learn More

  44. SpeedFactory Racing Honda/Acura LS/B20 Upper Coolant Fill Neck

    $214.99

    SpeedFactory Racing B-Series LS/B20 Upper Coolant Fill Necks are compatible with most aftermarket radiator setups, and change the high point of your cooling system for easy filling and system air bleeding. Our necks are manufactured in-house using high quality aluminum materials and feature laser-cut head flanges to ensure a perfect fit every time.

    Learn More

  45. SpeedFactory Universal Catch Can Hose & Fitting Kit

    $242.99

    Complete your catch can system plumbing confidently with our high-quality -10AN hose and fitting kits that offer trouble-free installation and the performance you expect from SpeedFactory Racing.

    Learn More

  46. SpeedFactory Racing 3 Filter Oil Catch Can

    $284.99

    The SpeedFactory 3-Filter Oil Catch Can is specifically designed for forced induction and heavily modified naturally aspirated engines. This internally baffled breather setup is engineered to provide the sufficient crankcase ventilation your high performance engine needs, and also condenses crankcase blow-by oil and moisture correctly. The factory PCV system is replaced and all oil vapors are vented to the atmosphere through three high quality reusable/washable breather filters.

    Learn More

  47. Speedfactory Rising Sun Oil Catch Can

    $284.99

    The SpeedFactory Racing Rising Sun Oil Catch Can is specifically designed for forced induction and heavily modified naturally aspirated engines. This internally baffled breather setup is engineered to provide the sufficient crankcase ventilation your high performance engine needs, and also condenses crankcase blow-by oil and moisture correctly. The factory PCV system is replaced and all oil vapors are vented to the atmosphere through the laser cut logo.

    Learn More

  48. SpeedFactory Honda/Acura B-Series RACE Cooling System Fill Pots

    $284.99

    SpeedFactory Racing Honda/Acura B-Series Cooling System Fill Pots are compatible with most aftermarket radiator setups, and change the high point of your cooling system for easy filling and system air bleeding. Your cooling system's capacity will also be increased by roughly 1 quart.

    Learn More

  49. SpeedFactory B-Series STREET Series Cooling System Fill Pots

    $284.99

    Whether you have a custom radiator or a SpeedFactory Race/Tucked radiator for your application, you need a proper way to fill and bleed air from your B-Series engine's cooling system from the highest point- and we have the solution.

    Learn More

  50. SpeedFactory Racing 3-Filter Oil Catch Can Black Edition

    $311.99

    The SpeedFactory Black Edition 3-Filter Oil Catch Can is specifically designed for forced induction and heavily modified naturally aspirated engines. This internally baffled breather setup is engineered to provide the sufficient crankcase ventilation your high performance engine needs, and also condenses crankcase blow-by oil and moisture correctly. The factory PCV system is replaced and all oil vapors are vented to the atmosphere through three high quality reusable/washable breather filters.

    Learn More

  51. SpeedFactory B-Series Catch Can Hose & Fitting Kit

    $317.99

    Complete your catch can system plumbing confidently with our high-quality -10AN hose and fitting kits that offer trouble-free installation and the performance you expect from SpeedFactory Racing.

    Learn More

  52. SpeedFactory B-Series Catch Can Hose & Fitting Kit With Crankcase Pressure Port Fitting

    $325.99

    Complete your catch can system plumbing confidently with our high-quality -10AN hose and fitting kits that offer trouble-free installation and the performance you expect from SpeedFactory Racing.

    Learn More

  53. SpeedFactory Heavy Duty K-Series Shift Selector

    $344.99

    The new SpeedFactory K-Series Shift Selector is the long awaited solution to the weak cast factory piece. K-Series racers worldwide have had to deal with this piece breaking for years, often costing them a race and transmission damage.

    Learn More

  54. SpeedFactory Racing 3" Stainless Steel Mandrel Bent Exhaust Piping Kit

    $429.99

    The SpeedFactory Racing 3" Stainless Steel Mandrel Bent Exhaust Piping Kit is a simple and affordable high-performance exhaust piping kit that fits all the most common FWD Honda/Acura applications, done just the way we like.

    Learn More

  55. SpeedFactory Racing Front Mount Drag Race Fuel Cell

    $482.99

    The team at SpeedFactory Racing has developed this left side frame rail mounted fuel cell with many performance & safety features in mind.

    Learn More

  56. SpeedFactory L19 Extreme Duty Headstud Kit B18/K20/K24

    $496.99

    SpeedFactory Racing Extreme Duty L19 Head Stud Kit for Honda/Acura B & K Series (B18C1, B18C5, B20VTEC, LSVTEC, K20, K24)

    Learn More

  57. SpeedFactory Racing Angled Oil Catch Can with built in Coolant Overflow Tank

    $560.99

    The SpeedFactory Racing Angled Oil Catch Can with built in Coolant Overflow Tank is specifically designed for forced induction and heavily modified naturally aspirated engines. This breather setup is engineered to provide the sufficient crankcase ventilation your high performance engine needs, and also condenses crankcase blow-by oil and moisture correctly.

    Learn More

  58. SpeedFactory Standard Dual Backdoor Front Mount Intercooler - 3" Inlet / 3" Outlet (600HP-850HP)

    $620.99

    The SpeedFactory DBD-850 Dual Backdoor Intercooler is built with a high quality 3" thick SpeedFactory Air-to-Air Intercooler Core, featuring bar and plate construction with a very specific staggered fin combination engineered to achieve maximum cooling efficiency while minimizing pressure drop.

    Learn More

  59. SpeedFactory Standard Side Inlet/Outlet Universal Front Mount Intercooler - 3" Inlet / 3" Outlet (600HP-850HP)

    $620.99

    The SpeedFactory Standard SS-850 Side Inlet/Outlet Intercooler is built with a high quality 3.0" thick SpeedFactory Air-to-Air Intercooler Core, featuring bar and plate construction with a very specific staggered fin combination engineered to achieve maximum cooling efficiency while minimizing pressure drop.

    Learn More

  60. SpeedFactory Vertical Flow Intercooler (K-Series, 800HP)

    $689.99

    The SpeedFactory 800 HP-rated Vertical Flow Intercooler was designed specifically for Honda / Acura vehicles equipped with K-Series engines. This intercooler is built with a high quality 3" thick SpeedFactory Air-to-Air Intercooler Core, featuring bar and plate construction with a staggered fin combination engineered to achieve maximum cooling efficiency while minimizing pressure drop.

    Learn More

  61. SpeedFactory HP Dual Backdoor Front Mount Intercooler - 3" inlet / 3" Outlet (850HP-1000HP)

    $758.99

    The SpeedFactory DBD-1000 Dual Backdoor Intercooler is built with a high quality 3.5" thick SpeedFactory Air-to-Air Intercooler Core, featuring bar and plate construction with a very specific staggered fin combination engineered to achieve maximum cooling efficiency while minimizing pressure drop.

    Learn More

  62. SpeedFactory HP Side Inlet/Outlet Universal Front Mount Intercooler 3" Inlet/Outlet (850HP-1000HP)

    $758.99

    The SpeedFactory HP SS-1000 Side Inlet/Outlet Intercooler is built with a high quality 3.5" thick SpeedFactory Air-to-Air Intercooler Core, featuring bar and plate construction with a very specific staggered fin combination engineered to achieve maximum cooling efficiency while minimizing pressure drop.

    Learn More

  63. SpeedFactory Racing Aluminum Tucked Radiator

    $818.99

    The SpeedFactory Racing Aluminum Tucked Radiator is a must have when trying to utilize precious engine bay space in your Honda/Acura vehicle. These radiators are substantially more efficient than your OEM radiator even under average daily driving conditions, and also provide lower coolant temperatures in very extreme environments and conditions- resulting in the increased performance you need all around for your vehicle.

    Learn More

  64. SpeedFactory Modified Shift Change Holder Assembly for B-Series (New Unit)

    $845.99

    SpeedFactory (SF)-Modified Shift Change Holder Assembly for B-series hydraulic transmissions!

    Learn More

  65. SpeedFactory HPX Dual Backdoor Front Mount Intercooler - 3" Inlet / 3.5" Outlet (1000HP-1200HP)

    $896.99

    The SpeedFactory DBD-1200 Dual Backdoor Intercooler is built with a high quality 4.5" thick SpeedFactory Air-to-Air Intercooler Core, featuring bar and plate construction with a very specific staggered fin combination engineered to achieve maximum cooling efficiency while minimizing pressure drop.

    Learn More